Restore your Holosun EPS Carry Red Dot Sight

Occasionally, you may require to reset your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected performance. Fortunately, resetting your Holosun is a easy process that can be performed in just a few procedures.

Initially ensuring your red dot sight is activated.
Find the small button for reset on the bottom of the unit.
Use a small object to press and hold the reset switch for approximately 7 seconds.
Release the lever and your Holosun EPS Carry Red Dot sight will reboot.
Your red dot sight should now be set back to its factory settings.

Return to Your Holosun EPS Carry Red Dot toward Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it back to standard configuration is a breeze. First, locate the tiny button on the side of your optic. Then, press and hold it for around five seconds until you see the indicator light change. Your Holosun EPS Carry is now returned to its factory settings, here ready for precise aiming.

Bring Your Holosun EPS Carry Back to Action

Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these easy steps:

Simultaneously press and hold the power button for approximately 7 seconds.
An indicator will flash, indicating that the reset is being performed.
Stop pressing the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and test your sight's functionality. If you encounter any further difficulties, don't hesitate to reach out to their technical assistance.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.

First, Activate your Holosun EPS Carry by pressing the power button.
After that, press and hold both the mode button and the up/down adjustment button simultaneously.
While continue holding these buttons, press the power button once.
The display will show a confirmation prompt indicating that the reset process is initiated.
Permit the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically deactivate.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Original reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Instruction for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.

Reinitialize your Holosun EPS Carry with a Factory Standard Settings

If your Holosun EPS Carry is acting erratically, a factory reset might be the fix. This will return your sight to its original settings, clearing any personalized configurations you've made. To accomplish this reset, follow these easy steps:

To begin, identify the reset switch on your EPS Carry.
Then, engage a thin object, like a paperclip, to push the reset lever.
As you maintain the reset lever pressed, power on your EPS Carry.
The sight will display a message indicating that the reset is successful.

After the reset is successful, your EPS Carry will be returned to its factory settings.